Content-Type: text/x-zim-wiki
Wiki-Format: zim 0.4
Creation-Date: 2019-11-02T23:48:59+01:00

== == == === DCP-9020CDW === == == ==
Oprettet lørdag 02 november 2019

Installation

	[[smarken.dk:home:teknologier:hardware:raspberry_pi:printer:https://download.brother.com/welcome/dlf100441/dcp9020cdwlpr-1.1.2-1.i386.deb|Download LPR driver.]]
	https://download.brother.com/welcome/dlf100441/dcp9020cdwlpr-1.1.2-1.i386.deb

	Login as a superuser ( or use "sudo" option if required).
     
	Check if pre-required procedures are completed
	For Debian/Ubuntu 64bit
     
	Install the driver.
		Turn on the printer and connect the usb, network or parallel cable.
		Go to the directory where the driver is.
		Install LPR driver.The install process may take some time. Please wait until it is complete.
		Command  :  dpkg -i --force-all  (lpr-drivername)
		Check if the LPR driver is installed.
		Command  :  dpkg -l  |  grep  Brother
         

== ==  Confirm/Configure a file according to your connection.  == ==

     
		Check the configuration filename for your distribution.
		Example:
		openSUSE, Ubuntu, Debian : /etc/printcap
		Redhat, fedora, Mandriva : /etc/printcap.local
         
		Edit the file according to your connection.

== ==  For USB Connection (Default)  == ==
		Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"

== ==  For Network Connection  == ==
		replace ":lp" line to the following 2 lines
		:rm=(ip address of your printer)\
		:rp=lp\

== ==  For Parallel Connection  == ==
		replace ":lp" line to the following line
		:lp=/dev/lp0\
         

== ==  Restart the print system.  == ==
		Command  (for  lpr):  **/etc/init.d/lpr  restart**
		Command  (for  lprng)  :  **/etc/init.d/lprng  restart**
         
	Try a test print.